Tony Grove • Artwork - Boatbuilding - Furniture
 

Projects on the go
Home > Projects

Restoration of Inga, a 1969 Scandinavian Nordic Folk Boat
Read my article about work on this Nordic Folk Boat
Inga is a 1969 Scandinavian Nordic Folk Boat
Inga is a 1969 Scandinavian Nordic Folk Boat sitting in Tony’s shop ready for it to be getting a new life.
2.	The deck of Inga, were in its life someone laid fibreglass with polyester resin over the original planked deck, needless to say we caught it just in time.
The deck of Inga, were in its life someone
laid fibreglass with polyester resin over
the original planked deck, needless to say
we caught it just in time.

After all the hardware was removed the fibreglass took 20 minutes to remove
After all the hardware was removed the fibreglass
took 20 minutes to remove.
Inga without her deck
Inga without her deck

Repairs and re-fasting to all the deck beams, this image shows new half beams and the planking removed port side
Repairs and re-fasting to all the deck beams, this image shows new half beams and the planking removed port side.
The owner comes over  periodically to do some work, here he is the removing all the hull paint so we  can asses the boat and give her new paint job that will make her look brand  new
The owner comes over periodically to do some work, here he is the removing all the hull paint so we can asses the boat and give her new paint job that will make her look brand new.
Were she had rot, a  new top plank on the transom and the new partial framework and deck beam
Where she had rot, a new top plank on the transom and the new partial framework and deck beam.


Restoration of a Fish boat on the property (photo below). This boat is a 1949 double ender west coast fishing boat 32 ft long 10 ft beam cedar on oak being restored and converted to a cruising boat by Paul McManus.
1949 double ender west coast fishing boat


14ft clinker sailing dinghy "Skylark"
designed by Paul Gartside (photos below)
building a peapod
Working on the frame

building a peapod
Half the planking done

the finished hull of the peapod
The finished hull of the Paul Gartside “Skylark” a beautiful hull.
If you want to know what it was used for you need to Email me.



 
2024© Tony Grove      Email with any edits or suggestions
Site created and maintained by Clayrose Inernet Creations